Mixed Media Butterfly

 Mixed Media Butterfly.

Its great to work on different shapes for scrapbooking, i love to mix it up a bit.

another Dt project for Thompsons craft supplies.

for this project i used.....

woodouts butterfly mdf blank

13arts papers end of summer

hobbilicious mdf feathers and leaves

hobbilicious hobbles

finnabair art alchemy wax firebird

finnabair art alchemy sparks acrylic paint phoenix feather

from my stash i used black gesso, 3d medium.

to start with i covered my butterfly with one of the papers and using some sand paper i distressed the edges.

next i gently edged it with some black ink

i mounted my photo onto black card

then i painted my mdf feathers and leaves with black gesso

i fussy cut some of the designs from the paper pack .

then i layered them all on without gluing to decide on my design, i took a photo to remind me of where i wanted everything and then removed it all.

i gradually started to build it all up using 3d gel medium as my glue for my mdf pieces and 3d foam pads with the medium to stick down my paper pieces, the 4d foam pads also adds height to the pieces so you have a lovely 3d finish.

i then mixed together some 3d gel with the hobbles and added round the butterfly edge and across the leaves and feather.

when it was all dry i added some wax to my hobbles edging and the black gesso'd feather and leaves, not completely covering, still allowing the black to dominate.

lastly i splattered with somewatered down black gesso and some watered down sparks paint.

  

  

Follow your Heart - Scrapbook Layout

Follow your heart scrapbook layout

these papers are just my subject and colourways, just love them, and when you love something it makes it very easy to create with them, and this set did just that.

My DT kit from Thompsons craft supplies for October 

i need to get these done before i go away on my weeks sewing retreat with friends 

(if restrictions allow, watching the updates constantly!!)

and this range is making it very easy to do that.

for this project i used......

13arts end of summer paper range

13arts end of summer A4 sticket sheet

13arts end of summer stencil - sunflowers

 finnabair sparks acrylic paint - pheonix feather

finnabair art alchomy wax -  firebird

Tim Holtz idea ology words

Hobbilicious mdf leaves

Thompsons craft supplies flower collections

from my stash i also used clear gesso

my how to....

i started by painting my whole background sheet with clear gesso, 

when this was dry i sponged through my stencil with the acrylic paint.

i mounted my photo on some white card stock and placed in just above centre using 3d foam pads and 3d gel

i chose and fussy cut my paper elements and painted with clear gesso,

i then placed them all to see how my arrangement would sit, when i was happy i took a picture to refer back to , took it all apart and started to glue it all in place using 3d foam pads and 3d gel for the paper elements and the 3d gel for the mdf leaves.

starting with the mdf leaves i built it up finishing with the paper flowers.

i then added my title.

i covered my photo and splattered with water down acrylic paint.

  

 

      

 

Mixed Media Notebook

 Oh the projects came so easy with these 13arts papers, just love them.

my second DT project for Thompsons craft supplies

a mixed media notebook, i love books and have many, the problem is i write in them all and then cant find what i am looking for because i have so many lol.

for this project i used....,

13arts end of summer papers

Thompsons craft supplies mixed flower collections

finnabair metallic wax firebird

craft oclock mixed media quotes 2

creative embellishments frame

mdf leaves and feathers

hobbilicious stencil elfland

color glow golden calite

finnabair art alchomy paint phoenix feather

from my stash i used black stazon ink,black gesso, white gesso, 3d gel for my glue and some glass bead texture gel, you can make this with 3d gel and just mixing with glass seed beads, the gel will dry clear.

to start with on this project as it is a bound notebook i started by stippling the spine with white gesso and round the edge of the cover, i dried it with my heat gun and then stippled the paint on, no need to do the middle as it will be covered, i did the back in the same way but had to wait till one side was completely dry before doing the second side .

i then cut papers to fit the front only not the spine and slightly smaller. i glued on using my 3d gel and then painted all over with my clear gesso and dried.

i then sponged the orange paint through my stencil randomly over the front and back .

while that was drying i painted my frame with black gesso and then that was stuck on with the 3d gel.

i added some of the bead gel around the book edges and in parts around the frame and dried them.

i then sprinkled some of the colour glow in places and sprayed with water to activate and move the colour around a little and then dried.

i painted my mdf leaves and feathers with the paint and when dry just distressed the edges with black my black ink pad.

i fussy cut a flower collection and a single sun flower and butterfly and layered up the paper pieces and mdf feathers and leaves.and added my butterfly.

i painted my paper pieces with clear gesso and dried.

i then distressed all around the book edge very gently with the black ink pad and then using my finger waxed picking up the beads and the frame detail in parts.

i added my title which i had distressed with the wax.

lastly i watered down a little black gesso on my glass cutting mat and splattered gently all over.

for the back i got as far as the stencilling and adding the colour glow then inked gently with the back round the edges and then picked up detail with the wax but left it without any other embellishments so that it will sit flat.

  

   

   

l. 

Mixed Media Retreat--At Home

 so this weekend just gone we were meant to be 30 strong on a mixed media retreat, self catering, craft workshops , gifts and games, a weekend of crafting and fun.....

No

the decision was made a little while ago that it could not go ahead in the current situation understandable, but still disappointing 

so what to do.....

go online of course, so with a lot of work, mostly from Louise at Thomson Craft supplies we had an online workshop with fab projects and crafty fun all from the safety of our homes.

and it was amazing, had a lot of fun and a great crafty fix.

Mixed Media Clipboard

 The First of my October Dt projects for Thompsnscraftsupplies.

oh my how i love this paper set from 13arts, its right up my street, i love autumn and the colours on this set are so strong and lush, it was so easy to create with.

for this project i used

13arts end of summer papers

13arts summer days rice paper

hobbilicious mdf leaves

thompson craft supplies mixed flower collections

finnabair mettalic wax firebird

and from my stash i used some small wooden letters,an A5 clipboard.

firstly icut my rice paper to fit under and round the top clip and then using 3d gel i glued it on by painting the gel onto the board then painting over the rice paper when in place.

i then used a piece of the paper pad and cut out a piece to fit at the bottom as a pocket, i cut it to shape but fussy cut along the top of the pocket and attacked it by using a strong double sided tape.

i cut out two pieces from the papers to use as mymenu sheets and added the title which i had coloured with the wax. you could use it for whatever you want it doesnt have to be a menu board , it could be a letter holder.

i distressed round the edge of the main board and then waxed all around.

i cleared gesso'd the top clip and waxed that too.

i lightly waxed my mdf leaves and then did an arrangement with them and my mixed flowers